Ghost Immobiliser Fitting
Secure your vehicle from theft of keys, cloning and hacking with the world's first aftermarket immobiliser for CAN. With the option to connect to an Ghost app and GPS tracking system that will send you call alerts in the event that your vehicle is damaged with or stolen.
The installation of an Ghost immobiliser can be completed by a qualified technician. Having the right tools, insulation tape and heat shrink tubing is essential.
Getting Started
Ghost immobilisers are an excellent alternative to physical theft devices like wheel locks and car alarms. They safeguard your vehicle without using LED indicators or key fobs. Instead they connect directly to the ECU's CAN data network. They can only be activated after entering a PIN sequence. This gives a greater level of protection against key hacking, ECU swapping and cloning.
As a result, installing a ghost immobiliser Birmingham is a task that must be carried out with extreme agility and accuracy. It's like walking through an icy minefield. One mistake could cause irreparable damage to the circuits of the electrical system of your vehicle. It is essential to comprehend the installation procedure and prepare your vehicle properly.
You'll need to take out interior panels from the vehicle to make room for the immobiliser. Once you have found the perfect place to hide it then use cable ties to fix it. Then, tidy your wiring by connecting loose wires and using insulation tape to cover exposed connections. This reduces the chance of a short circuit that is not intended to happen and improve the appearance and reducing the chance of theft.
Identify a constant source of 12V power, as well as a grounding for the ghost immobiliser. Once you have found them test the power cables using a multimeter. Connect the CAN H and the CAN L wires of your immobiliser with the grounding and power sources.
It is crucial to check all connections and examine the immobiliser to look for indications of corrosion. You should also test the system to make sure it's functioning properly by entering a PIN number and starting the engine. This should be part of your routine as it will allow you to spot any issues that are intermittent early. Regular testing can help increase the longevity of your device and ensure it is performing at its best.
Preparing your vehicle
The installation of a Ghost immobiliser is a complex job that requires the appropriate tools and understanding. A wiring diagram is crucial for finding the correct wires, making accurate connections and ensuring security. A multimeter can be used to check the electrical properties and ensure security. Insulation tape and cable tie can be used to secure the connections and prevent being tampered with. A user's manual is provided for your Ghost Immobiliser. It will provide you with specific instructions that are tailored to your model.
Once installed, the ghost immobiliser will stop engine starts that are not authorized by requiring the owner to enter a unique code using the buttons on the steering wheel or console. This can be done either manually or remotely via the mobile phone app and the code is able to be altered by the owner of the vehicle at any time. immobiliser ghost and is inaccessible to thieves since it doesn't emit radio frequency.
A ghost immobiliser is connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts the signals transmitted by ECUs and then blocks the engine when a false signal is identified. The system is tamperproof and weatherproof, with no LED indicators or key fobs to draw the attention of thieves.
It can be positioned behind the dashboard or in an inconspicuous area, so that it isn't visible to thieves and doesn't interfere with the vehicle's performance. It can be placed in a small container so it is less likely to be spotted by fraudulent salespeople when they test drive.
Its stealthy operation, along with its integration into the CAN-bus system of the vehicle, can be a powerful deterrent to modern vehicle theft techniques, such as signal relay attacks and key cloning. Combining the system with other security measures will create a formidable barrier that will deter even the most persistent of thieves. This is why more insurance companies are now suggesting or even requiring ghost immobilisers be installed, as it will significantly lower the cost of insurance.
Making Connections
Ghost immobilisers are silent unlike traditional security systems, which can be heard by thieves. They prevent them from knowing that your car is in operation. They also stop high-tech methods used to steal vehicles, such as OBD port hacking. They can also be put in without leaving permanent marks on your vehicle which makes them a great choice for people who plan to sell their vehicle in the near future.
The Autowatch Ghost 2 is a immobiliser CANbus that is among the most reliable and current solutions to prevent car theft. It shuts down your engine by using the CAN data network and generates a unique PIN number that is difficult for criminals to guess. It is compatible with various vehicles, and works with many features already installed including car alarms, steering wheel locks, GPS trackers, and door lock bypass.
If you choose to use a Ghost immobiliser for your vehicle, be sure you refer to the wiring diagram to identify the wires to connect. Check their locations to ensure they are exact, and label them or tape them to help keep track of them. You'll also need to locate a source of continuous power (12V) and an earthing point for the system. Once you have these in place, you are able to begin to connect the components to complete the installation.
When the ghost immobiliser is connected to your CAN bus it will block your vehicle from starting until you enter a pin number using the buttons on the steering wheel or dashboard. This will stop ECU hacking, key cloning, and other methods of vehicle theft. In addition, it could be used in conjunction with other Thatcham-approved security devices, like alarms and tyre clamps to provide your vehicle with an even greater degree of security.
As the UK automotive aftermarket industry expands, so do the options for securing your vehicle. There are many ways for thieves to get into your car and steal it, so it's important to do all you can to ensure that it isn't taken away. This is why ghost immobilisers are very popular among responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via an CAN network. This stops the engine from being started until the PIN code has been entered. This makes it extremely difficult for thieves to steal your key fob and start your car, and even more difficult to disable the system by hacking into its electronics.
Ghost Immobilisers can also be used with GPS tracking devices to help locate your vehicle in the event that it's stolen. This feature isn't typically found in security products that are sold aftermarket however it's a great option to increase the security of your vehicle and provide you with peace of peace of.
In addition to providing increased security and security, the Ghost-II immobiliser provides a simple user experience by removing the requirement for additional key fobs or devices. It is simple and easy PIN code entry that can be integrated seamlessly with your daily routine. Additionally, it provides modes of deactivation and other features that let you temporarily disable the immobiliser for valet parking or for servicing.
Prepare the necessary tools and familiarise yourself first with the wiring of your vehicle. A basic set of hand tools will allow you the flexibility to create precise connections, while a multimeter can help determine electrical values. Insulation tape and heat shrink tubing are also crucial for securing connections from short circuits and cable ties can be used to hold the wire in the correct position. Additionally, it is essential to be in a well-lit space and wear appropriate safety gear when working with electrical and tool components.
You should test the Ghost immobiliser after having completed the installation to make sure it's functioning properly. You should first try to start the car without entering the PIN. If this doesn't work then you'll have to test again and examine the connections more carefully.
Unlike other security systems unlike other security systems, unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is far more effective than conventional physical deterrents like wheel clamps or steering locks. It is TASSA approved and recognised by some insurance companies, which makes it an investment that's cost-effective and can give you the peace of mind that you want.